IAS Aroid Quasi Forum

About Aroid-L
 This is a continuously updated archive of the Aroid-L mailing list in a forum format - not an actual Forum. If you want to post, you will still need to register for the Aroid-L mailing list and send your postings by e-mail for moderation in the normal way.

  [Aroid-l] A fun bedtime story for (tuberous) aroiders
From: Ken Mosher ken at spatulacity.com> on 2005.12.19 at 04:32:40(13624)
Everyone's surely maxed out on mix, so here's a fun lession I learned
this week. At the IAS 2004 show I acquired a number of unknown species
Amorphs. Two of the species were clearly of the type that produced
elongated tubers, but the ones I had were all small, some broken. I
didn't really know what to expect.

I potted them up in my usual 1/2 gal square nursery pots and they grew
nicely. I just got around to (trying) to unpot them during this last week.

For a tiny bit of background, I'm refurbishing a greenhouse that was
built in the 1950's and went uncared for for several years. This spring
I built all new benches and used "expanded metal" for the benchtops. If
you don't know what that is, it's a mesh with sort of diamond shaped holes.

Back to the story... I grabbed one of the pots labelled "unknown
linearis complex" and felt the pot tug back at me. I figured it just hit
against its neighbor, so I ignored it. I tipped it upside down and
dumped out all the soil, carefully broke up the pot-shaped mass, NO
TUBER! "Curious," I thought to myself, "I'm sure there was a plant in
that pot this summer." So I went for the neighbor of the first one, only
to solve the mystery of the missing tuber...

There, stuck in the mesh of my benchtop, was a very long, very skinny
tuber that had grown right down through the center drainage hole for
about 2 inches and down through the top of my bench! When I grabbed the
pot it caught in the narrowing diamond-shaped mesh and yanked the entire
tuber right out of the bottom of the pot through the drainage hole - no
damage to the tuber!

Of course one out of five had to grow down through one of the holes on
the edge of the bench where it's wedged between the mesh and the side.
That one will have to get hacksawed out this week...

OK, you've had your laugh now go to bed.

-Ken

+More
Note: this is a very old post, so no reply function is available.