IAS on Facebook
IAS on Instagram
|

IAS Aroid Quasi Forum
About Aroid-L
This is a continuously updated archive of the Aroid-L mailing list in a forum format - not an actual Forum. If you want to post, you will still need to register for the Aroid-L mailing list and send your postings by e-mail for moderation in the normal way.
Re: plastic plant labels
|
From: Lester Kallus <lkallus at earthlink.net> on 1999.03.30 at 23:06:23(3179)
Thanks for the response but the labels I'm looking for would never go
through a printer. I suspect they're describing the labels that get
wrapped around a plant stem or trunk.
I'm looking for the solid hard plastic labels - they're rigid. Generally
they get stabbed into the soil. (But I sure do like the price you
mentioned! Furthermore, it's going to be at least a couple months before
I've accumulated 100 new plants.)
Les
| +More |
At 11:18 PM 3/29/99 -0600, you wrote:
>-----Original Message-----
>From: Lester Kallus
>To: bcook@interlog.com
>Date: Monday, March 29, 1999 9:46 PM
>Subject: plastic plant labels
>
>
>>Garden centers frequently use plastic labels roughly 1/2 - 3/4 .....
>>Does anyone know of a source for purchasing a box of these?
>
>
>Les, I asked at a few nurseries until I found one that would sell me a box
>at their cost (about $17.00Can / 1000). I intend to try the following next
>time.
>
>For regular lables and ones that will go through a printer (dot matrix or
>possibly laser only, ink jet print is water soulable):
>
>C Frensch Ltd.
>4774 Hinan Drive, Box 476
>Beamsville Ontario
>Canada L0R 1B0
>
>Tel: 905-563-4774 Fax: 905-563-5053
>
>Sorry no internet connection that I know of but they are happy to sell mail
>order to the public and I think that the printer labels are about $30.00Can.
>/1000. They were quite friendly on the phone and sent me quite a few
>different samples. They also carry the regular labels you are looking for in
>many sizes and colours. They have a good reputation around here, it might be
>worth a phone call.
>
>Hope this helps,
>Brian
>
|
|
Note: this is a very old post, so no reply function is available.
|
|